Modulum Luminescence Measurement


Together with Fraunhofer ISE Intego has developed a system for luminescence measurement. Electroluminescence and photoluminescence as well as combinations of these methods are used for image acquisition. The system can be used for various applications such as spatially resolved charge carrier lifetime measurements, determination of iron concentration and measurements for efficiency estimation of wafers (ELBA). In addition, further user-defined measuring sequences and evaluations can be integrated.


Specification

  • system dimensions: 2 m x 2.1 m x 1.1 m
  • large volume for the measurement of ingots, wafers, cells and mini modules: 170 mm x 1100 mm x 900 mm
  • large field of view: 170 x 170 mm² (larger on request)
  • manual height adjustment of the measurement table
  • vacuum chuck for fixation and temperature control (25-80°C) of test specimens
  • laser illumination: 808 nm wavelength, intensity of 0.1 - 2 suns, spatial homogeneity deviations below 10 %, temporal modulation of the output power (adaptations such as a second laser source are possible on request)
  • Electrical contacting: back-side contacting via chuck, front-side contacting via adaptable frame with contact bars
  • Si-based camera with deep-depletion for minimal dark current, cooled to -70°C, standard resolution of 180 µm and spectral limitation to 950 nm - 1000 nm (adaptable on request)
  • Photodetector: time-resolved measurement of injection and luminescence response of the sample, high sensitivity due to optimized photo diode setup with low-noise current amplifier
  • Typical measuring time of 1-10 seconds, for complex measuring procedures also hours to days


Performance Data

The system is especially designed for use in research and development and can be flexibly adapted to different measurement tasks. Customer specific hard- and software solutions can be integrated on request. Of course, the measuring principle can also be transferred to an inline application.

 


Further options

If you require an individual solution, Intego offers free-of-charge feasibility studies based on sample parts. The prepared study will include a system design with draft specifications and a price estimate. Do not hesitate to contact us directly.